steveej/infra
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions

router0-dmz0: further wifi tweaking

Browse source 
with these settings i did not get a single disconnect after 3-4 hours of testing.
This commit is contained in:
steveej 2024-08-03 18:14:18 +02:00
parent fa45a3a1e3
commit c64db438a2
1 changed files with 10 additions and 139 deletions
Download patch file Download diff file Expand all files Collapse all files

149
nix/os/devices/router0-dmz0/configuration.nix
View file

@ -909,7 +909,7 @@ in {
channel = 0; # 0 would mean Automatic Channel Selection
settings = {
# TODO: with 1 the x13s on windows can't connect, however this slows the AP down.
# TODO: this would be faster but x13s on windows can't connect when it's enabled.
# ieee80211n = 1;
# Exclude DFS channels from ACS
@ -921,6 +921,11 @@ in {
# indications of connection loss. This depends on the driver capabilities and
# may not be available with all drivers.
disassoc_low_ack = 0;
skip_inactivity_poll = 1;
# TODO: check if this is required. multicast can be more efficient so it'd be nice to disable this.
multicast_to_unicast = 1;
};
# use 'iw phy#1 info' to determine your VHT capabilities
@ -1038,7 +1043,8 @@ in {
wmm_enabled = 1;
# IEEE 802.11i (authentication) related configuration
# Encrypt management frames to protect against deauthentication and similar attacks
# Encrypt management frames to protect against deauthentication and similar attacks.
# 0 := disabled; 1 := optional; 2 := required
ieee80211w = 1;
# sae_require_mfp = 1;
# sae_groups = "19 20 21";
@ -1046,147 +1052,12 @@ in {
# [ENABLE-TLSv1.3] = enable TLSv1.3 (experimental - disabled by default)
tls_flags = "[ENABLE-TLSv1.3]";
ieee8021x = 1;
eap_server = 1;
multicast_to_unicast = 0;
skip_inactivity_poll = 0;
disassoc_low_ack = 0;
ieee8021x = 0;
eap_server = 0;
};
};
# wlan0-1 = {
# ssid = "mlsia-testing";
# authentication = {
# mode = "wpa3-sae-transition";
# };
# bssid = mkBssid 1;
# settings = {
# bridge = bridgeInterfaceName;
# };
# };
# wlan0-1 = {
# ssid = "justtestingwifi-wpa3";
# authentication = {
# mode = "wpa3-sae";
# saePasswordsFile = config.sops.secrets.wlan0_1_saePasswordFile.path;
# };
# bssid = mkBssid 1;
# settings = {
# bridge = bridgeInterfaceName;
# };
# };
# Uncomment when needed otherwise remove
# wlan0-1 = {
# ssid = "koteczkowo3";
# authentication = {
# mode = "none"; # this is overriden by settings
# };
# managementFrameProtection = "optional";
# bssid = "e6:02:43:07:00:00";
# settings = {
# bridge = bridgeInterfaceName;
# wpa = lib.mkForce 2;
# wpa_key_mgmt = "WPA-PSK";
# wpa_pairwise = "CCMP";
# wpa_psk_file = config.sops.secrets.legacyWifiPassword.path;
# };
# };
};
};
# wlan1 = {
# band = "5g";
# # channels with 160 MHz width in Poland: 36, 52, 100 i 116
# channel = 0; # ACS
# countryCode = "PL";
# # use 'iw phy#1 info' to determine your VHT capabilities
# wifi4 = {
# enable = true;
# capabilities = ["HT40+" "LDPC" "SHORT-GI-20" "SHORT-GI-40" "TX-STBC" "RX-STBC1" "MAX-AMSDU-7935"];
# };
# wifi5 = {
# enable = true;
# operatingChannelWidth = "160";
# capabilities = ["RXLDPC" "SHORT-GI-80" "SHORT-GI-160" "TX-STBC-2BY1" "SU-BEAMFORMER" "SU-BEAMFORMEE" "MU-BEAMFORMER" "MU-BEAMFORMEE" "RX-ANTENNA-PATTERN" "TX-ANTENNA-PATTERN" "RX-STBC-1" "SOUNDING-DIMENSION-4" "BF-ANTENNA-4" "VHT160" "MAX-MPDU-11454" "MAX-A-MPDU-LEN-EXP7"];
# };
# wifi6 = {
# enable = true;
# singleUserBeamformer = true;
# singleUserBeamformee = true;
# multiUserBeamformer = true;
# operatingChannelWidth = "160";
# };
# settings = {
# # these two are mandatory for wifi 5 & 6 to work
# vht_oper_centr_freq_seg0_idx = 50;
# he_oper_centr_freq_seg0_idx = 50;
# # The "tx_queue_data2_burst" parameter in Linux refers to the burst size for
# # transmitting data packets from the second data queue of a network interface.
# # It determines the number of packets that can be sent in a burst.
# # Adjusting this parameter can impact network throughput and latency.
# tx_queue_data2_burst = 2;
# # The "he_bss_color" parameter in Wi-Fi 6 (802.11ax) refers to the BSS Color field in the HE (High Efficiency) MAC header.
# # BSS Color is a mechanism introduced in Wi-Fi 6 to mitigate interference and improve network efficiency in dense deployment scenarios.
# # It allows multiple overlapping Basic Service Sets (BSS) to differentiate and coexist in the same area without causing excessive interference.
# he_bss_color = 63; # was set to 128 by openwrt but range of possible values in 2.10 is 1-63
# # Magic values that were set by openwrt but I didn't bother inspecting every single one
# he_spr_sr_control = 3;
# he_default_pe_duration = 4;
# he_rts_threshold = 1023;
# he_mu_edca_qos_info_param_count = 0;
# he_mu_edca_qos_info_q_ack = 0;
# he_mu_edca_qos_info_queue_request = 0;
# he_mu_edca_qos_info_txop_request = 0;
# # he_mu_edca_ac_be_aci=0; missing in 2.10
# he_mu_edca_ac_be_aifsn = 8;
# he_mu_edca_ac_be_ecwmin = 9;
# he_mu_edca_ac_be_ecwmax = 10;
# he_mu_edca_ac_be_timer = 255;
# he_mu_edca_ac_bk_aifsn = 15;
# he_mu_edca_ac_bk_aci = 1;
# he_mu_edca_ac_bk_ecwmin = 9;
# he_mu_edca_ac_bk_ecwmax = 10;
# he_mu_edca_ac_bk_timer = 255;
# he_mu_edca_ac_vi_ecwmin = 5;
# he_mu_edca_ac_vi_ecwmax = 7;
# he_mu_edca_ac_vi_aifsn = 5;
# he_mu_edca_ac_vi_aci = 2;
# he_mu_edca_ac_vi_timer = 255;
# he_mu_edca_ac_vo_aifsn = 5;
# he_mu_edca_ac_vo_aci = 3;
# he_mu_edca_ac_vo_ecwmin = 5;
# he_mu_edca_ac_vo_ecwmax = 7;
# he_mu_edca_ac_vo_timer = 255;
# };
# networks = {
# wlan1 = {
# ssid = "koteczkowo5";
# authentication = {
# mode = "wpa3-sae";
# saePasswordsFile = config.sops.secrets.wifiPassword.path; # Use saePasswordsFile if possible.
# };
# bssid = "36:b9:02:21:08:a2";
# settings = {
# bridge = bridgeInterfaceName;
# };
# };
# };
# };
};
};